Get Rid Of Mildew Stains From Material And Plastic Mould

It's so annoying to open your drapes or blinds and see the dreaded black Plastic mold on your window frame. The temperature difference from the outside and the inside creates condensation and an ideal environment for the growth of black Plastic mold.

This can be a health hazard especially if you have a family member that has allergies or asthma. There is an easy way to get rid of the mold and deter its return.

Pull back the drapes and tie them away from the window. Raise the blinds. It's not necessary to take everything apart to remove the black mold. But it's necessary to be able to get to the mold.

Full a spray bottle with water. Add one teaspoon of dish washing soap and one fourth cup vinegar. Shake to mix.

Put on disposable face mask and plastic gloves. Spray mixture on the window frame. Let set for one minute to soak into the mold. This keeps the mold spores in the air to a minimum.

Scrub with brush to loosen the black Plastic mould. Spray soap mixture as needed to keep the mold moist.

Take cloth rag and wipe mold off window frame. Turn rag often . When the rag is covered with mold throw away. Use as many rags as needed to finish job.

Soak rag in rubbing alcohol. Rub the window frame. This will dry the window frame and pick up any mold left on the frame. It helps delay the return of black mold.

Wipe moisture from window often to deter the developing of mold.Throw away any rags used in cleaning.Black mold is a health hazard . Be sure to wear protective gloves and mask.Clean window frame often. Don't let Rapid prototype accumulate.Bleach can be added if you're working outdoors. Do not use bleach inside. Fumes can be harmful.Use caution when dealing with mold it can be a health hazard.